Videojet 1710 Operator's Manual

※ Download: Videojet 1520 service manual

The panel contains the connectors shown in Figure 3-12. Refer to Table 5-12 on page 5-35 for more information. Set to External option for use with a compatible shaft encoder where the line speed is variable.

Note: Press F2 to select user field. Ink and Make-up Fluid Capacity The ink and solvent capacity of the printer are shown in Table A-6. The user has to enter a password to change to a different password level. Ensure that the cleaning solution is compatible with the ink used before carrying out printhead cleaning otherwise the printhead may get damaged.

Videojet 1520 Continuous Inket Printer - Select the Reset Counter option see Figure 5-40. Up to four bar widths and four space widths can be set.

I figure someone here might be using VideoJet manhal />I'm interfacing to the 'Print Trigger 1' and 'Print Trigger 2 Reverse Print ' inputs. Connectors 2 and 6 in the service drawing. My customer sent me the manual for the printer, but the 'pinouts' section only tells me what connector does what the same as the sticker on the side of the printer. I need to know the pinout mmanual the actual 3 pin connectors. Since they normally connect to photoelectric sensors, I'm guessing just +V, -V, and signal, but I don't know if it's looking for sinking or sourcing, and which pin is which. I don't have access to 1520 printer until Monday, but was hoping to wire up my interface this weekend, so I don't have sefvice solder the connectors on site. I already videonet the correct Amphenol connectors. I'm not quite sure which models off the top of my head, but looking at a pic of the 1520 it looks very like ours. I've had to make up extension leads for servoce sensors on the 3pin sockets before. I would have some info manusl work on it I'm sure but I'm not back in vudeojet Monday evening. I live close to my workplace. If you want I can call in and check for you? You posted this about 20mins before I left work last night. Ok Eric, I realised with the time difference you'd be snoring while I'm waiting for your reply, so I called into work here now. We used to have 1510s, but upgraded to 1610 Videojets in 2011. I have videojet full service manual on cd with all the pinouts, so I've spliced this pic together for you. You can compare the connector layout to yours.

VideoJet 1520 Ink Jet Coder
The sequence requires one minute to complete. All detected products are counted here including the products on which the printer has not printed a message. Select the Reset Counter option see Figure 5-40. Set the cursor at the point in the message where you require to paste the text. Set to External option for use with a compatible shaft encoder where the line speed is variable. Moves the cursor ten dots at a time and not draw any line. Make sure there is enough time available between prints to phase. Figure 5-63: Logo Editor Menu This menu contains the following options: To Set Logo Size You can change the size of the logo after you insert the logo.